Manufacture Sandwich Panel

Manufacture Sandwich Panel wall systems are specialized cladding systems consisting of three layers; one thick core layer of low average strength and density and two outer metal plates. The thick center is an insulating core and is generally made out of mineral wool. The two outer plates are made of steel, which provides the best protection. The three layers are connected to each other through specialized adhesives.

Manufacture Sandwich Panel is often used for external and internal architectural cladding and/or partitioning. These panels can be applied in the onshore and offshore oil & gas industry, wind energy industry and the infra & defense industry.

But what are the exact benefits of a sandwich wall system on a structure? We have outlined them below:

1. Weight saving
Due to its lightweight characteristic, a sandwich panel saves a lot of weight on the applied structure. The inner core of insulation and the thin plates have an approximate weight of 21 kg/m2 at 100 mm panel thickness.

2. Fast installation
Because of its lightweight, the panels can be transported and installed very effectively and efficiently. Consequently, it saves you a lot of time and labor costs.

3. Good thermal insulation
The mineral wool insulation provides good thermal protection. Thermal insulation is important because it allows for temperature regulation inside the compartments. Temperature is kept at a comfortable level in order to provide a pleasant working environment for personnel.

4. Excellent non-combustible and acoustic performance
The insulation is required to be non-combustible to ensure fire safety. Non-combustible materials withstand the spread of fire and therefore are processed into the insulation material.

Generation IV®

In order to meet requirements of the on- and offshore Oil, Gas, and Wind industry Van Dam have developed their Generation IV Wall System ®, an A60 fire rated sandwich panel system. Especially set out for harsh offshore environments.

Panel dimensions and sizes are determined but can be increased in case different project requirements need to be met. The length can be fabricated up to a staggering 20m¹ length.

Available in several kinds of materials, such as:

• Stainless steel 316L – Stainless steel 316L (Internal – External)
• Stainless Steel 316L – Plastisol
• Plastisol – Stainless steel 316L
• Plastisol – Plastisol

Our Generation IV® sandwich wall system has the following specifications:

• Excellent weather and gastightness properties
• Excellent anti-corrosion resistance properties
• High sound reduction of 34 dB and optionally with higher values
• Short installation time due to large panel width of 1000 mm
• Available in different kind of materials and finishes
• Low competitive price level